Highly flexible and elastic 80A TPU S-680ALL with Improved Processability and increased design flexibility
Brand:
KOSLENItem NO.:
S-680ALLPayment:
T/TProduct Origin:
ChinaShipping Port:
XiaMenLead Time:
7-15 days
Highly flexible and elastic 80A TPU S-680ALL with Improved Processability and increased design flexibility
Koslen TPU resin S-680ALL features with high melt index typically exhibits lower viscosity compared to TPU grades with lower melt indexes. This reduced viscosity enables easier processing during injection molding, facilitating better flow and filling of complex mold cavities, meanwhile enables faster cycle times during injection molding. S-680ALL offers greater freedom in part design. Its improved flowability allows for the molding of intricate and complex geometries with thin walls. That’s why it been widely used to produce the products that require soft and flexible materials, such as overmolding, gaskets, seals, or cushioning components.
The properties of S-680ALL TPU ( thermoplastic elastomer ) granule :
Physical Properties |
Test Standard |
Unit |
Typical Value* |
Density |
ASTM D792 |
g/cm3 |
1.21±0.02 |
Shore Hardness |
ASTM D2240 |
Shore A Shore D |
82A±3 A
|
Tensile Strength |
ASTM D412 |
Kgf/cm2 |
150 |
Elongation at Break |
ASTM D412 |
% |
550 |
100% Tensile Strength |
ASTM D412 |
Kgf/cm2 |
40 |
300% Tensile Strength |
ASTM D412 |
Kgf/cm2 |
60 |
Tear Strength |
ASTM D624 |
Kgf/cm |
60 |
Molding Conditions |
|||
Drying |
Drying Temperature |
100°C |
|
Drying Time |
2-4hrs |
||
Processing |
Processing Temperature |
170-195°C |
|
Processing Mold |
Injection Molding |