how can we help you
Hardness below 90A, 3-4 hours at 80℃-90℃
Hardness below 95A, 3-4 hours at 90℃-100℃
When drying, low hardness specification should avoid high temperature and long time for high temperature will cause stick agglomeration and long time drying will make it yellowish
Injection molding temperature reference (Unit ℃ )
Model/Specification
C1 Feed Section
C2 Compression Section
C3 Metering Section
Nozzle
85A
175
180
185
190
95A
180
185
190
195
64D
190
195
200
205
72D
195
205
210
215
Extrusion molding temperature reference (Unit ℃ )
Model/Specification |
C1 Feed Section |
C2 Compression Section |
C3 Metering Section |
Nozzle |
75A | 170 | 180 | 180 | 190 |
85A | 180 | 185 | 190 | 195 |
95A | 185 | 190 | 195 | 200 |
Characteristic Comparison
Model/Specification |
S100 | E300 | B400 | S600 | B700 |
Transparency | Good | Excellent |
Excellent |
Fair |
Excellent |
Hydrolytic Stability | Fair | Excellent |
Excellent |
Fair |
Good |
Heat Resistance |
Good |
Fair |
Excellent |
Good |
Good |
Oil Resistance |
Good |
Fair | Excellent | Good |
Good |
Low Temperature Resistance |
Good |
Excellent |
Excellent |
Excellent |
Good |
Moldability |
Good |
Fair | Good |
Excellent |
Fair |
Abrasion Resistance |
Good |
Fair | Good |
Excellent |
Good |